home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PD Collection CD 1
/
PD Collection CD 1.iso
/
textual
/
gnudiff
/
Readme
< prev
Wrap
Text File
|
1991-03-04
|
6KB
|
159 lines
This directory contains the GNU DIFF and DIFF3 utilities, version 1.15.
See file COPYING for copying conditions. To compile and install on
system V, you must edit the makefile according to comments therein.
Report bugs to bug-gnu-utils@prep.ai.mit.edu
Version 1.15 has the following new features; please see below for details.
-L (+file-label) option
-u (+unified) option
-a and -m options for diff3
Most output styles can represent incomplete input lines.
`Text' is defined by ISO 8859.
diff3 exit status 0 means success, 1 means overlaps, 2 means trouble.
This version of diff provides all the features of BSD's diff.
It has these additional features:
An input file may end in a non-newline character. If so, its last
line is called an incomplete line and is distinguished on output
from a full line. In the default, -c, and -u output styles, an
incomplete output line is followed by a diagnostic line that starts
with \. With -n, an incomplete line is output without a trailing
newline. Other output styles (-D, -e, -f) cannot represent an
incomplete line, so they pretend that there was a newline, and -e and -f
also print an error message. For example, suppose F and G are one-byte
files that contain just ``f'' and ``g'', respectively.
Then ``diff F G'' outputs
1c1
< f
\ No newline at end of file
---
> g
\ No newline at end of file
(The exact diagnostic message may differ, e.g. for non-English locales.)
``diff -n F G'' outputs the following without a trailing newline:
d1 1
a1 1
g
``diff -e F G'' sends two diagnostics to stderr and the following to stdout:
1c
g
.
A file is considered to be text if its first characters are all in the
ISO 8859 character set; BSD's diff uses Ascii.
GNU DIFF has the following additional options:
-a Always treat files as text and compare them line-by-line,
even if they do not appear to be text.
-B ignore changes that just insert or delete blank lines.
-C #
request -c format and specify number of context lines.
-F regexp
in context format, for each unit of differences, show some of
the last preceding line that matches the specified regexp.
-H use heuristics to speed handling of large files that
have numerous scattered small changes. The algorithm becomes
asymptotically linear for such files!
-I regexp
ignore changes that just insert or delete lines that
match the specified regexp.
-L label
Use the specified label in file header lines output by the -c option.
This option may be given zero, one, or two times,
to affect neither label, just the first file's label, or both labels.
A file's default label is its name, a tab, and its modification date.
-N in directory comparison, if a file is found in only one directory,
treat it as present but empty in the other directory.
-p equivalent to -c -F'^[_a-zA-Z]'. This is useful for C code
because it shows which function each change is in.
-T print a tab rather than a space before the text of a line
in normal or context format. This causes the alignment
of tabs in the line to look normal.
-u[#]
produce unified style output with # context lines (default 3).
This style is like -c, but it is more compact because context
lines are printed only once. Lines from just the first file
are marked '-'; lines from just the second file are marked '+'.
This version of diff3 has all of BSD diff3's features, with the following
additional features.
An input file may end in a non-newline character. With the -m option,
an incomplete last line stays incomplete. Other output styles treat
incomplete lines like diff.
The file name '-' denotes the standard input. It can appear at most once.
diff3 has the following additional options:
-a Always treat files as text and compare them line-by-line,
even if they do not appear to be text.
-i Include 'w' and 'q' commands at the end of the output, to write out
the changed file, thus emulating system V behavior. One of the edit
script options -e, -E, -x, -X, -3 must also be specified.
-m Apply the edit script to the first file and send the result to
standard output. Unlike piping diff3's output to ed(1), this works
even for binary files and incomplete lines. -E is assumed if no edit
script option is specified. This option is incompatible with -i.
-L label
Use the specified label for lines output by the -E and -X options,
one of which must also be specified. This option may be given zero,
one, or two times; the first label marks <<<<<<< lines and the second
marks >>>>>>> lines. The default labels are the names of the first and
third files on the command line. Thus ``diff3 -L X -L Z -E A B C''
acts like ``diff3 -E A B C'', except that the output looks like it
came from files named X and Z rather than from files named A and C.
Exit status 0 means success, 1 means overlaps were found and -E or -X was
specified, and 2 means trouble.
GNU DIFF was written by Mike Haertel, David Hayes, Richard Stallman
and Len Tower. The basic algorithm is described in: "An O(ND)
Difference Algorithm and its Variations", Eugene Myers, Algorithmica
Vol. 1 No. 2, 1986, p 251.
Many bugs were fixed by Paul Eggert. The unified diff idea and format
are from Wayne Davison.
Suggested projects for improving GNU DIFF:
* Handle very large files by not keeping the entire text in core.
One way to do this is to scan the files sequentally to compute hash
codes of the lines and put the lines in equivalence classes based only
on hash code. Then compare the files normally. This will produce
some false matches.
Then scan the two files sequentially again, checking each match to see
whether it is real. When a match is not real, mark both the
"matching" lines as changed. Then build an edit script as usual.
The output routines would have to be changed to scan the files
sequentially looking for the text to print.